Special Wood Carving Secrets

Every wood worker or hobbyist, over a period of time, develops their own set of special wood carving secrets that come out of personal experience. There are so many special wood carving secrets that have gone on to become industry norms even, while others have remained in their kitty as their signature styles. The best part about being in such a hobby is that there are so many different secrets but so few people who actually want to keep it hidden.

The hobby is filled with specialists, professionals and people who are willing to share their special wood carving secrets with the world and here are some of those secrets that really make a difference in the way one creates masterpieces on wood.

Some Special Woods

There are different kinds of woods that a hobbyist can use but age-old principles and properties of some kinds of wood always take precedence over others. For e.g. the wood of the lime tree is often used by amateurs because it is so soft and easy to carve into. It is also the least likely to split or splinter when the going gets tough and that makes it a popular choice. For someone who is slightly more experienced, but still at the amateur level, the next level would come in the form of wood from the walnut tree.

Amongst those who regard special wood carving secrets as their guiding principles, the American walnut wood variety is preferred more, mostly because of its dark colour. However, its wider grains require more care, which means that it is something that hobbyists can start using once they are slightly more into the hobby. For those looking for a lighter wood for their project, there is chestnut or holly to choose from, also perfect for people starting off in the hobby.

These special wood carving secrets will also tell you that the best way for an amateur to move to the next level is by shifting onto English Oak or Italian walnut, which are harder varieties. The walnut always has a rich finish to it and a dark colour, but with the Italian or English varieties, you also get something harder to work with, therefore get a better output as you go along.

Fixing your Piece

To secure your piece of work and hold it in place is a very important part of wood carving, more than most people tend to think. Everything seems so easy when you see an experienced wood carver holding the piece in their hands and working away at the piece. However, they have probably had years of experience and their fair share of mistakes & accidents to realise how to get to this point. Based on these special wood carving secrets mentioned below, you are likely to reduce almost all chances of accidents and injury, otherwise possible from this hobby.

The first thing you need is a proper work table or bench, where you can secure your work. You can buy purpose-built wood carving work-benches at stores or get a local carpenter to build you one, or just build one yourself. Once you have this bench, you need to get yourself something called a carver's screw. This is a tool that has a nut on one end and a screw at the other. What you need to do is bore a hole into the back of the wood, using a small tool or drill, and then pass the screw through it and turn the nut to tighten it onto the bench.

Since this form of screw hangs mostly under the table, it stays out of your way as you work along and guarantees that your piece will not move around. You can also use iron clamps to secure your work but they might end up being too intrusive on the piece. However, if you are working on a piece where boring a hole through isn't possible, this might be the best solution at hand.

Finally, if you are working on a long piece, like a table leg or a lamp-stand, then you might need to get a cramp. The cramp can be placed on your work bench and this allows you to work on the piece while rotating or turning it horizontally within the cramp, without any form of slipping or sliding around. You might even have to glue-down very small pieces of work such that they stay in place. This is an important piece of information because sculpting tiny pieces, while holding them in your hand, is always risky if your hands aren't steady. Gluing them down always ensures better grip and less movement.

If you are gluing the piece to the work bench, then make sure you place a piece of paper between the piece and the bench, because the glue might make it hard for your piece to be removed without breaking the piece. The paper, on the other hand, will come out easily.

Most hobbyists will find it quite hard to get their hands on such age-old tips and special wood carving secrets but it isn't always possible to find someone around you who can give them to you. Books and the Internet are a great place to go to while famous craftsmen and artists might also be able to share their experiences with you. The best thing about such special wood carving secrets is that they never go out of fashion!

Other Great Hobbies

DIY Bathroom Ideas

RC Blimps

Sage Oil

Barware Collectibles